TipOne® 300 µl Graduated Tip
300 µl Graduated Tip (Graduations: 100 µl, 200 µl, 300 µl)
Certified free of detectable RNase, DNase, DNA and Pyrogen free logo
TipOne® Refill
The two-part label
Each refill comprises two stacks of tips connected by an innovative perforated double label. All product information is provided on both sides of the label
so even after the stacks are separated both are still easily identifiable. To prevent inventory mistakes, each refill contains only one barcode area.
Each refill comprises two stacks of tips connected by an innovative perforated double label. All product information is provided on both sides of the label
so even after the stacks are separated both are still easily identifiable. To prevent inventory mistakes, each refill contains only one barcode area.
TipOne® Tip Refill - seperating
Separating the refill
The two-part label splits easily to provide two, individually-sealed stacks of tips.
The two-part label splits easily to provide two, individually-sealed stacks of tips.
TipOne® Tip Refill - removing wafers
Removing wafers from the refill
Remove the protective film and lift the top wafer, including the top shell, off
the stack. Use the finger tabs on either end of the wafer to lift the refill. (The spacer below the wafer will lift too.)
Remove the protective film and lift the top wafer, including the top shell, off
the stack. Use the finger tabs on either end of the wafer to lift the refill. (The spacer below the wafer will lift too.)
TipOne® Tip Refill - refill the stack
Refill the rack
It’s so easy! Simply place the wafer, top shell and spacer into an empty rack and click securely in place. The top shell can either remain inside the rack for extra protection or transferred back to the top
layer of the open refill if not racking all five at the same time.
It’s so easy! Simply place the wafer, top shell and spacer into an empty rack and click securely in place. The top shell can either remain inside the rack for extra protection or transferred back to the top
layer of the open refill if not racking all five at the same time.
TipOne® Tip Refill - refill complete
Close the lid, refilling is
complete
Refilling a rack takes only a few seconds. The refilled rack can now be used or autoclaved, depending on your
application.
complete
Refilling a rack takes only a few seconds. The refilled rack can now be used or autoclaved, depending on your
application.
TipOne® Tip Refill - spacers
The spacers
Spacers are placed between the layers of tips to provide effective protection from contamination (only for refills with the following tip volumes: 10/20 µl XL, 300 µl und 1000 µl).
Spacers are placed between the layers of tips to provide effective protection from contamination (only for refills with the following tip volumes: 10/20 µl XL, 300 µl und 1000 µl).
TipOne® Tip Refill - stack recovering
Recover the partially used
stack
The remaining tips of the refill can be protected from contamination by replacing
the top shell. (There’s no need to take off the bottom shell when transferring the last wafer. Both bottom shell and wafer fit into the new rack.)
stack
The remaining tips of the refill can be protected from contamination by replacing
the top shell. (There’s no need to take off the bottom shell when transferring the last wafer. Both bottom shell and wafer fit into the new rack.)
300 µl Graduated Tip, Refill
- Graduated at 100 µl, 200 µl and 1000 µl
- Universal fit: One tip fits all! The tip collar is engineered to fit all popular pipettes.
- Highly polished moulds: For an extremely smooth surface to reduce sample retention.
- Material: All TipOne® tips are manufactured from pure, virgin polypropylene to ensure the highest quality product.
- Certified: Every TipOne® product is certified RNase, DNase, DNA and Pyrogen free.
TipOne® is the original refillable, reusable and recyclable pipette tip system. Recent improvements to the design of the system, based on customer-feedback, is why TipOne® is one of the leading tips for research labs.
Convenience and quality are at the heart of the system and TipOne® remains the same tip that you have used and trusted over the years.
Tip fit
One tip fits all! The tip collar is engineered to fit all popular pipettes.
Manufacture
The use of multiple cavity tools for the injection moulding process guarantees high conformity within one batch. The automated moulding and assembling procedures are carried out under clean-room conditions to eliminate contamination.
Unique collar
Our newest tips can be recognised by the jagged design on the tip collar.
Material
All TipOne® tips are manufactured from pure, virgin polypropylene to ensure the highest quality product.
Green tip design
A reduction of up to 40 % in the material used for the production of TipOne® tips helps to save valuable resources and is beneficial for the environment.
Highly polished moulds
For an extremely smooth surface to reduce sample retention.
Quality Control
Automated Quality Control procedures ensure that TipOne® is inspected for 100% performance. Every TipOne® product is certified RNase, DNase, DNA and Pyrogen free.
The clever refill
The 10/20 µl XL, 300 µl and 1000 µl pipette tips are, due to their geometry, not nestable. To be able to offer a space saving refill for these tips we developed a unique spacer which is mounted, via four notches, to the bottom of the wafer. We have significantly reduced the use of material compared to the old refills by up to 50% in weight and up to 60% in volume. This not only saves on storage space in the lab, but is also more eco-friendly as less resources are used, and less CO2 is released during both production and transportation.
Convenience and quality are at the heart of the system and TipOne® remains the same tip that you have used and trusted over the years.
Tip fit
One tip fits all! The tip collar is engineered to fit all popular pipettes.
Manufacture
The use of multiple cavity tools for the injection moulding process guarantees high conformity within one batch. The automated moulding and assembling procedures are carried out under clean-room conditions to eliminate contamination.
Unique collar
Our newest tips can be recognised by the jagged design on the tip collar.
Material
All TipOne® tips are manufactured from pure, virgin polypropylene to ensure the highest quality product.
Green tip design
A reduction of up to 40 % in the material used for the production of TipOne® tips helps to save valuable resources and is beneficial for the environment.
Highly polished moulds
For an extremely smooth surface to reduce sample retention.
Quality Control
Automated Quality Control procedures ensure that TipOne® is inspected for 100% performance. Every TipOne® product is certified RNase, DNase, DNA and Pyrogen free.
The clever refill
The 10/20 µl XL, 300 µl and 1000 µl pipette tips are, due to their geometry, not nestable. To be able to offer a space saving refill for these tips we developed a unique spacer which is mounted, via four notches, to the bottom of the wafer. We have significantly reduced the use of material compared to the old refills by up to 50% in weight and up to 60% in volume. This not only saves on storage space in the lab, but is also more eco-friendly as less resources are used, and less CO2 is released during both production and transportation.
Technical Highlights
| Color Code Wafer | Green |
| Material | Polypropylene |
| Sterile | No |
| Color | Natural |
| Volume | 300 µl |
| Autoclavable | Yes |
| Color Code Wafer | Green |
| Material | Polypropylene |
| Pack Size | 960 Tips (10 Refills × 96 Tips) |
| Sterile | No |
| Color | Natural |
| Volume | 300 µl |
| For use with | Abimed, Biohit®, BRAND®, Capp®, Eppendorf®, Gilson®, Hamilton®, HTL, Nichiryo®, Rainin®, Sartorius®, Socorex®, STARLAB®, Thermo Scientific™ |
* The TipOne® Pipette Tips in all packaging units Rack, Refill-System, Stack-Rack, Bag and Filter-Refill are designed and constructed for low-contamination transfer of liquids, in particular for samples from the human body and for reagents within the scope of an in-vitro diagnostic application in order to allow the in-vitro diagnostic device to be used as intended. The above mentioned TipOne® are in-vitro diagnostic devices according to Directive 98/79/EC of the European Parliament and the Council dated October 27, 1998. They are intended exclusively for single use and for application by qualified staff.
